S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-838008.png)
5. Remove the special tool.
NOTE: Left-hand shown, right-hand similar.
6. Install the rear subframe reinforcement plate retaining bolts.
-
Tighten to 47 Nm.
7. Attach the right-hand shock absorber.
-
Tighten to 133 Nm.
8. Install the left-hand shock absorber and spring assembly.
NOTE: Left-hand shown, right-hand similar.
9. Attach the wiring harness.
