S-Type (X200) V8-4.2L (2005)
5. Disconnect the left-hand rear wheel speed sensor electrical connector.
6. Detach the left-hand rear wheel speed sensor wiring harness.
-
Reposition the left-hand rear wheel speed sensor wiring harness.
7. Remove both of the mufflers and tail pipes.
8. Remove the front muffler.
WARNING: Rotate the special tool height adjustment valve slowly. Failure to follow this instruction may result in personal injury.
9. Install the special tool to support the left-hand side of the rear subframe.
10. Remove the rear subframe left-hand reinforcement plate retaining bolts.