S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-839006.png)
NOTE: Rear subframe shown removed for clarity.
4. Connect the evaporative emission canister vent solenoid electrical connector.
NOTE: Rear subframe shown removed for clarity.
5. Connect the evaporative emission canister vent solenoid vent hose.
Vehicles with supercharger
NOTE: Rear subframe shown removed for clarity.
1. Install the fuel pump driver module.
-
Install the retaining clip.
NOTE: Rear subframe shown removed for clarity.
2. Connect the fuel pump driver module electrical connector.
