S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-839008.png)
5. Tighten the rear subframe left-hand rear retaining bolt.
-
Tighten to 125 Nm.
WARNING: Rotate the special tool height adjustment valve slowly. Failure to follow this instruction may result in personal injury.
6. Remove the special tool from the rear subframe.
7. Attach the front muffler.
8. Attach both of the mufflers and tail pipes.
9. Connect the left-hand rear wheel speed sensor electrical connector.
10. Attach the left-hand rear wheel speed sensor wiring harness.
11. Install the left-hand brake disc.
-
Install the brake disc to the original position in relation to the hub.
