S-Type (X200) V8-4.2L (2005)
Fuel Rail: Service and Repair
Fuel Injection Supply Manifold
Removal
1. CAUTION: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components.
Highly flammable vapors are always present and may ignite. Failure to follow these instructions can result in personal injury.
Remove the fuel injection supply manifold.
2. Detach the fuel pressure regulator.
-
Remove the securing bolts.
-
Remove and discard the O-rings.
Installation
1. CAUTION: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components.
Highly flammable vapors are always present and may ignite. Failure to follow these instructions can result in personal injury.
To install, reverse removal procedure.
-
Install new fuel pressure regulator O-rings. Lubricate the O-ring seals with clean engine oil to aid installation.
-
Tighten to 5 Nm.