S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-938007.png)
2. Remove the ignition coil-on-plug cover.
3. Disconnect the ignition coil-on-plug electrical connector.
4. Disconnect the brake servo pressure sensor electrical connector.
5. Remove the ignition coil-on-plug.
-
Remove the retaining bolt.
Installation
1. To install, reverse the removal procedure.
2. Tighten to 5 Nm.
Ignition Coil-on-Plug LH (18.20.44)
