S-Type (X200) V8-4.2L (2005)
Air Flow Meter/Sensor: Service and Repair
Mass Air Flow (MAF) Sensor (18.30.15)
Removal
1. Remove the mass airflow (MAF) sensor.
-
Disconnect the MAF sensor electrical connector.
-
Remove the mass airflow MAF sensor.
-
Remove and discard the MAF sensor O-ring seal.
Installation
1. To install, reverse the removal procedure.
-
Install a new MAF sensor O-ring seal.
-
Tighten MAF sensor retaining screws to 2 Nm.