S-Type (X200) V8-4.2L (2005)
3. Remove the ECT.
-
Remove and discard the ECT sealing washer.
Vehicles without supercharger
4. Remove the air cleaner outlet pipe.
5. Remove the engine coolant temperature (ECT) sensor electrical connector.
1. Disconnect the ECT sensor electrical connector.
2. Remove the ECT sensor.
-
Remove and discard the ECT sealing washer.
Installation
All vehicles
1. To install, reverse the removal procedure.
-
Install a new ECT sealing washer.
-
Fill the cooling system up to the MAX mark on the coolant expansion tank.
Vehicles with supercharger