S-Type (X200) V8-4.2L (2005)
5. Disconnect the condenser core supply and return lines.
^
Remove and discard the O-ring seals.
^
Cap the exposed ports.
6. Lower the vehicle.
7. CAUTION: Make sure that the radiator and the air conditioning condenser are not damaged during the removal of the cooling module.
Remove the cooling module.
Installation
All vehicles
1. CAUTION: Make sure that the radiator and the air conditioning condenser are not damaged during the installation of the cooling module.
NOTE: Install new O-ring seals to the condenser core supply and return lines and lubricate them with A/C refrigerant oil.
To install, reverse the removal procedure.
2. Tighten to 8 Nm.