S-Type (X200) V8-4.2L (2005)
Cruise Control Module: Service and Repair
Speed Control Module
Removal
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
NOTE: Make sure the audio unit keycode is available before disconnecting the battery ground cable.
1. Disconnect the battery ground cable.
2. Remove the driver side instrument panel lower trim.
3. Disconnect the speed control module electrical connector.
4. Remove the speed control module.
-
Remove the speed control module retaining nuts.
Installation
1. Install the speed control module.
-
Tighten to 5 Nm.
2. Connect the speed control module electrical connector.