S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1454002.png)
CAUTION:
-
Make sure the locking tool is correctly installed to the clockspring. Failure to follow this instruction may result in damage to the component.
-
Make sure the wheels are in the straight-ahead position. Failure to follow this instruction may result in damage to the component.
NOTE: A repair is made by replacement only. If a part is replaced and the new part does not correct the condition, install the original part and carry out
the diagnostic procedure again.
1. To install, reverse the removal procedure.
-
Tighten to 5 Nm.
