S-Type (X200) V8-4.2L (2005)
Seat Belt Buckle: Service and Repair
Front Safety Belt Buckle
Front Safety Belt Buckle
Removal
1. Remove the front seat.
2. Disconnect the front safety belt buckle electrical connector.
3. NOTE: The front safety belt buckle retaining bolt is part of the safety belt buckle and should not be separated.
Remove the front safety belt buckle.
Installation
1. CAUTION: Make sure all retaining bolts and retaining nuts are hand started and hand tightened prior to final tightening. Failure to
follow this instruction may result in component damage.
To install, reverse the removal procedure.
-
Tighten to 35 Nm.