S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-102001.png)
Collision Avoidance Sensor: Service and Repair
Rear Parking Aid Sensor - Vehicles Built From: 02/2004
Rear Parking Aid Sensor - Vehicles Built From: 02/2004
Removal
1. Remove the rear bumper cover.
2. Disconnect the electrical connector.
CAUTION: Make sure excessive pressure or tools are not used when removing the rear parking aid sensor from the housing.
3. Remove the rear parking aid sensor.
Installation
1. To install, reverse the removal procedure.
