jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

VIN Range: M45255->N52206|Page 938 > < VIN Range: M45255->N52206|Page 936
Page 2
background image

When the RESUME switch is operated with the vehicle travelling above 32 kph (20 mile/h) with the system in STANDBY mode, the vehicle is allowed
to accelerate until the last set speed is resumed. The RESUME switch will not function if the ignition switch has been cycled or if the vehicle speed is
below 32 kph (20 mile/h).

CANCEL Switch

When the CANCEL switch is operated with the vehicle travelling above 32 kph (20 mile/h) the system will enter STANDBY mode.

SET Switch

When the SET +/- switch is operated with the vehicle travelling above 32 kph (20 mile/h) the system allows the vehicle speed to be maintained to ± 1.62
kph (1 mile/h)
. Pressing the SET +/- switch will increase or decrease the vehicle speed respectively until the switch is released. If the respective switch
is pressed momentarily, the speed will accelerate or decelerate in 1.62 kph (1 mile/h) increments.

Brake Pedal Position (BPP) Switch

If the brake pedal is operated while the speed control system is active, the ECM receives a signal from the BPP switch. This will cancel vehicle speed
control and allow the throttle blade to return to the position as demanded by the accelerator pedal.

Speed Control Deactivation Switch (brake)

If the brake pedal is activated while the speed control system is active, the ECM receives a signal from the speed control deactivation switch. This will
cancel speed control and allow the throttle blade to return to the position as demanded by the accelerator pedal.

Clutch Pedal Position Sensor

If the clutch pedal is activated while the speed control system is active, the ECM receives a signal from the clutch pedal position switch. This will cancel
speed control and allow the throttle blade to return to the position as demanded by the accelerator pedal.

Adaptive Speed Control

On vehicles for certain markets, an adaptive speed control system is installed as an option. In addition to the normal vehicle speed control functions, this
system enables a preset distance to be maintained behind a moving vehicle immediately ahead, without driver intervention.

Automatic Switch Off - Vehicles with Adaptive Speed Control

VIN Range: M45255->N52206|Page 938 > < VIN Range: M45255->N52206|Page 936