S-Type (X200) V8-4.2L (2005)
Cruise Control Switch: Service and Repair
Speed Control Sensor
Speed Control Sensor
Removal
1. Disconnect the battery ground cable.
2. Remove the radiator splash shield.
3. Disconnect the speed control sensor electrical connector.
4. Remove the left-hand front bumper access cover.
5. Remove the speed control sensor.
-
Remove the bolts.
6. Remove the speed control sensor retaining bracket.
-
Remove the nuts.
Installation
1. Adjust the speed control sensor levelling bolt shoulder to mounting bracket clearance to 4.5 mm.
2. Install the speed control sensor.
-
Tighten to 5 Nm.