jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Fuel Pump Module - 2.5L/3.0L/4.2L, VIN Range: M45255->N52206|Page 1081 > < Fuel Pump Module - 2.5L/3.0L/4.2L, VIN Range: M45255->N52206|Page 1079
Page 5
background image

23. Using the special tool, remove the fuel transfer pump locking ring.

24. Detach and reposition the upper part of the fuel transfer pump.

CAUTION:  Make sure no damage occurs to the fuel level float.

25. Remove the fuel transfer pump.

-

Disconnect the fuel cross over lines.

26. Remove and discard the fuel transfer pump module gasket.
27. Remove the fuel pump module.

-

Remove and discard the fuel pump module gasket.

Installation

WARNING:

-

Place the vehicle in a quarantined area and arrange No Smoking/Petrol Fumes' signs about the vehicle.

-

Before any work is carried out on the fuel system, ground the vehicle to earth and maintain the ground connection until the work is
complete.

-

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly
flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.

-

The fuel system remains pressurized for a long time after the ignition is switched off. The fuel pressure must be relieved before
attempting any repairs. Failure to follow these instructions may result in personal injury.

-

After carrying out repairs, the fuel system must be checked visually for leaks. Failure to follow these instructions may result in personal
injury.

Fuel Pump Module - 2.5L/3.0L/4.2L, VIN Range: M45255->N52206|Page 1081 > < Fuel Pump Module - 2.5L/3.0L/4.2L, VIN Range: M45255->N52206|Page 1079