S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-155008.png)
CAUTION:
-
Vehicles with supercharger - make sure the arrow on the left-hand fuel pump module lines up with the 'SC' marker on the fuel tank.
-
Vehicles without supercharger - make sure the arrow on the fuel transfer pump lines up with the 'NA' marker on the fuel tank.
-
Make sure no damage occurs to the fuel level float.
NOTE:
-
Install a new gasket to the fuel transfer pump flange.
-
Take care not to stretch the gasket.
11. Install the fuel transfer pump.
12. Using the special tool, install the fuel transfer pump locking ring.
-
Tighten to 60 Nm.
13. Connect the fuel transfer pump electrical connector.
14. Attach the fuel transfer pump module electrical connector to the retaining bracket.
