S-Type (X200) V8-4.2L (2005)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor LH (18.31.12)
Camshaft Position (CMP) Sensor LH (18.31.12)
Removal
1. Remove the cowl vent screen.
2. Remove the engine compartment support.
3. Disconnect the camshaft position sensor (CMP) electrical connector.
4. Remove the CMP sensor.
-
Remove and discard the CMP sensor O-ring seal.
Installation
1. To install, reverse removal procedure.
-
Install a new CMP O-ring seal.
-
Tighten to 7 Nm.