S-Type (X200) V8-4.2L (2005)
6. NOTE: Make sure the tie-rod does not rotate.
NOTE: Left-hand shown, right-hand similar.
Tighten the tie-rod end lock nut .
1. Tighten to 100 Nm.
7. Recheck the toe settings. Follow the equipment manufacturer s instructions.
Rear Toe Adjustment
1. Check the toe settings. Follow the equipment manufacturer s instructions.
2. NOTE: Left-hand, shown right-hand similar.
Loosen the lock nut.
^
Clean and lubricate the lock nut and toe link threads.