S-Type (X200) V8-4.2L (2005)
3. Raise the vehicle.
4. Detach the A/C compressor.
Remove the A/C compressor lower retaining bolt.
5. Remove the power steering pump lower retaining bolts.
6. Lower the vehicle.
7. Detach the accessory drive belt.
Rotate the accessory drive belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the accessory drive belt tensioner.
Detach the accessory drive belt.
8. CAUTION: Cap the power steering lines to prevent loss of fluid and dirt ingress.
CAUTION: If power steering fluid comes into contact with the paint work, the affected area must be immediately washed down with cold water.
NOTE:
Drain the fluid into a suitable container.
Disconnect the power steering pump to steering gear pressure line.