S-Type (X200) V8-4.2L (2005)
8. Remove the special tool.
9. NOTE: Left-hand shown, right-hand similar.
Install the engine mount.
-
Tighten to 63 Nm.
10. CAUTION: The final tightening of the rear lower arm inner retaining nut and bolt must be carried out with the vehicle on its wheels.
NOTE: Left-hand shown, right-hand similar.
Install the rear lower arm.
11. CAUTION: The final tightening of the front lower arm inner retaining nut and bolt must be carried out with the vehicle on its wheels.
NOTE: Left-hand shown, right-hand similar.
Install the front lower arm.