S-Type (X200) V8-4.2L (2005)
Technical Service Bulletin # S204-S516
Date: 041101
Recall - Spare Tire Speed Restriction Label
S204-S516
S-TYPE
DATE
11/04
MODEL
2005 MY
S-TYPE
VIN
Refer to VIN list
Spare Tire Speed Restriction Label -
Lack of Adhesion -
Service Action S516
Issue:
A concern has been identified on a number of 2005 MY S-TYPE vehicles that are listed in this bulletin. On vehicles supplied with space saver spare
wheels, poor adhesion of the speed restriction label could result in the label coming loose from the space saver spare wheel.
Jaguar Cars will contact owners of the 2005 MY S-TYPE vehicles, listed in this bulletin, to replace the spare tire label.
A number of vehicles have been repaired at the Port of Entry facility. This Service Action affects vehicles that are outside of the control of the Port of
Entry facilities and any sold vehicles that have not yet been repaired.
Action:
Check the VIN list and DDW to determine validity of the vehicle against the Service Action to ensure that the spare tire label has not already been
replaced at the port, prior to carrying out any repair. DDW will be updated to reflect those vehicles affected by this Service Action.
At the time of confirming a booking for vehicle repair, please ensure that any outstanding Field Service Actions are identified to ensure the correct parts
are available and adequate workshop time is allocated for repairs to be completed at one visit.
WORKSHOP PROCEDURE
1.
Open the luggage compartment and install exterior vehicle protection.
2.
Reposition the luggage compartment carpet.
3.
Remove the tool foam inlay.
Note:
On some vehicle variants it is not necessary to remove the wheel to gain access to the front face of the space saver spare wheel.
4.
Remove the tee bolt securing the space saver spare wheel.
5.
Remove the space saver spare wheel and place aside.
6.
Remove the old speed restriction label from space saver spare wheel.
7.
Clean the area of space saver spare wheel before installing the new label.