S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-996002.png)
Special Service Tools
Removal
1. CAUTION: Under no circumstances must the flexible coupling (or its fixings) be loosened or removed from the driveshaft. Failure to follow this
instruction may result in damage to the vehicle.
CAUTION: Make sure the front of the driveshaft does not put an excessive load on the center bearing. Failure to follow this instruction may result in
damage to the vehicle.
Detach the driveshaft from the transmission flange.
Mark the position of the driveshaft in relation to the transmission flange.
Mark the position of each nut and bolt in relation to the transmission flexible joint.
