S-Type (X200) V8-4.2L (2005)
Constant Velocity Joint Boot: Service and Repair
Outer Constant Velocity (CV) Joint Boot
Outer Constant Velocity (CV) Joint Boot
Removal
1. Remove the Halfshaft.
2. CAUTION: Use suitable protective covers to protect the halfshaft.
Using a suitable clamp, secure the halfshaft.
3. Remove the outer constant velocity (CV) joint boot retaining clip.
^
Remove and discard the retaining clip.
4. CAUTION: Do not damage the bearing retainer.
NOTE: The outer CV joint is retained to the shaft by a spring clip.
Using a suitable brass drift, remove the outer CV joint.