S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-1921009.png)
3. Apply primer to the mating face of the body.
4. Cut adhesive nozzle to achieve a triangular section bead 8 mm (0.32 in) wide by 10 mm (0.4 in) high.
5. Using a suitable pneumatic application gun, apply a uniform bead of adhesive to the windshield glass edge commencing at the bottom center and
overlapping the ends approximately 14 mm (0.56 in).
6. CAUTION: When installing the windshield glass, do not strike it in any way as this will crack the windshield glass.
With assistance carefully install the windshield glass into the aperture. Aligning the windshield glass with the body markings and press firmly into
place.
7. Remove the lifting handles.
8. CAUTION: Make sure the windshield glass does not move out of position in the windshield glass aperture.
Apply suitable protective tape to the top of the windshield glass.