S-Type (X200) V8-4.2L (2005)
Wiper Motor Linkage: Service and Repair
Wiper Mounting Arm and Pivot Shaft
Removal
All vehicles
1. Disconnect the battery.
2. Remove the cowl panel grille.
3. Remove the drain tube.
4. Detach the mounting arm, wiper motor and pivot shaft assembly.
5. Remove the mounting arm, wiper motor and pivot shaft assembly.
-
Disconnect the wiper motor electrical connector.
Installation
1. To install, reverse the removal procedure.
-
Tighten to 12 Nm.