Sovereign L6-4.0L (1991)
Inspect the edges of the spacer for nicks, burrs and wear marks. Replace if necessary.
Refit the woodruff key.
Fit the pulley to the engine, hand tighten the securing bolt and fit Service Tool 18G 1437.
Wedge the tool against the front crossmember, torque tighten the securing bolt and remove Service Tool 18G 1437.
Re-position the alternator drive belt over the pulleys and refit the air conditioning belt (if fitted).
Refit the torquatrol unit/fan cowl assembly into position. Fit the cowl securing clips
Fit and tighten the torquatrol unit securing nuts.
Refit the spoiler/under tray.
Tension the alternator drive belt. A load of 1.5kg must give a total deflection of 4.5mm when applied to the mid-point of the belt.
Tension the air conditioning drive belt and tighten the securing bolts.
