Sovereign L6-4.0L (1991)
Alarm Module: Diagram Information and Instructions
Connector Codes
HARNESS CODE (LB) + CONNECTOR NUMBER (13) + PIN NUMBER (24)
Example: LB13-24 (pin number is separated by a dash)
Note: Absence of a dash and a pin number indicates a single wire connector.
Diode Codes
HARNESS CODE (LB) + D + IDENTIFICATION NUMBER (5)
Example: LBD5 (no dash is used)
Ground Codes
HARNESS CODE (LB) + G + IDENTIFICATION NUMBER (78)
Example: LBG78 (no dash is used)