Sovereign L6-4.0L (1991)
Wheel Hub: Service and Repair
Rear Suspension
-
Remove the rear road wheel.
-
Slacken off but DO NOT REMOVE the drive shaft securing nut.
-
Displace and remove the handbrake cable to the expander securing clip.
-
Reposition the cable from the lever.
-
Cut and remove the caliper securing bolts locking wire.
-
Cut and remove the brake pad harness to the hub securing clips.
-
Remove the caliper securing bolts.
-
Reposition the caliper from the disc and secure to the bump stop.
-
Reposition the disc access hole to the handbrake adjuster and release.
-
Remove the disc securing screw.
-
Displace and remove the disc.
-
Remove the fulcrum shaft securing nut.
-
Finally, remove the drive shaft to the hub securing nut and displace and remove the cone.
-
Slacken the tool centre bolt and fit the thread protector to the drive shaft.