Vanden Plas L6-3.6L (1988)
Radiator: Service and Repair
RENEW
- Open the bonnet.
- Remove the air cleaner element.
- Place a drain tin in position below the radiator drain plug to the offside of the radiator.
- Remove the radiator pressure cap, remove the drain plug (1 Fig 2) and allow the radiator to drain.
- Release the top hose from the radiator and pull clear. Remove the power assisted steering and gearbox (where fitted) cooling pipe unions (2 Fig 2).
- Remove the pipes from the radiator and discard the '0' rings.
- Plug the apertures in the pipes and the radiator.
- Disconnect the expansion tank hose from the radiator, slacken the clip securing the bottom hose to the radiator and pull the pipe clear of the radiator.
- Remove the clip.
- Remove the radiator cowl upper securing clips and remove the cowl.