Vanden Plas L6-3.6L (1988)
Transmission Position Switch/Sensor: Technical Service Bulletins
A/T - Gear Selector Cable/Inner Switch Setting Procedure
SELECTOR CABLE ADJUSTMENT
SECTION:
44
No:
5
Model:
XJ6 3.6 Date: JANUARY, 1988
KEY POINTS:
IMPROVED ADJUSTMENT AND SETTING PROCEDURE
Commencing from VIN 507776, an improved gear selector cable/ linear switch setting procedure is incorporated on XJ6 3.6 vehicles during production.
If gear selector cable adjustment becomes necessary, the following service checks and cable adjustment procedure should be performed.
Service Checks:
1.
Engine should start only with the gear selector in the "P" or "N" position.
2.
Reverse lights should illuminate only when "R" is selected.
3.
Instrument pack gear indicator display should correspond with gear selector lever indicator.
4.
Transmission parking lock mechanism is engaged with gear selector in position "P".
5.
Gear selector lever aligns centrally with position "R" and "N" detents in gear-selector module gate.
6.
Gear selector lever should shift smoothly across J-gate in position "D".
LINKAGE ADJUSTMENT PROCEDURE:
FIGURE 1
1.
Set transmission selector lever in "N" position.
2.
Connect gear selector cable to gear selector lever.