Vanden Plas L6-4.2L (1982)
Front Door Window Glass: Service and Repair
Removing
- Open the bonnet and disconnect the battery.
- Remove the door trim casing and the front door crash rail. See: Front Door Panel/Service and Repair
- Remove the door outer weather strip.
- Remove the door speaker (1, Fig. 59).
- Remove the screws securing the window lift motor mounting plate (2, Fig. 59) and remove the stop peg (3, Fig. 59) from the mounting plate.
- Remove the window lower channel securing bolts.
- Remove the distance piece from the rear of the mounting plate.
- Remove the regulator outer slide channel securing bolts (4, Fig. 59) and remove the channel.
- Remove the motor from the mounting plate and disconnect the electrical feed cables.
- Lower the motor to the bottom of the door. Slide the door glass forward and disengage the lift motor operating arm from the guide channel (1, Fig.
60). Withdraw the glass (2, Fig. 60) from the door.
- Remove the guide channel and seal (3, Fig 60) from the door glass.
Refitting
