Vanden Plas (X300) L6-4.0L (AJ16) (1996)
/l6-4.0l_(aj16)/Page-1655001.png)
Seat Heater: Locations
Rear Seat Heaters
Rear seat heaters are introduced as an Option for VDP and XJ12 models. The heater system for each seat position consists of two heater elements,
a control module and a control switch.
Heater Elements
Separate heater elements are installed in the cushion and the squab of each seat. The temperature of the two elements at each seat position is
controlled by a thermostat in the respective cushion heater element.
Control Modules
The control modules are 10 to 12 minute timer relays. The control module for each seat is installed on the related heelboard.
Control Switches
The control switches are installed on the rear extension of the front console. They are push on/push off type switches with a status indicator.