Vanden Plas (X300) L6-4.0L (AJ16) (1996)
/l6-4.0l_(aj16)/Page-799001.png)
Air Injection Pump: Service and Repair
Fig. 1 Air Pump
-
Open the hood and fit a wing cover.
-
Disconnect the air pump harness multi-plug.
-
Slacken the air pump inlet and outlet hose securing clips and disconnect the hoses.
-
Undo and remove the three air pump to mounting bracket securing bolts.
-
Remove the air pump.
-
Remove the air pump rubber mounts.
-
Refitting the air pump is the reverse of the removal procedure.