Vanden Plas (X300) L6-4.0L (AJ16) (1996)
-
Re-position the caliper for access to the carrier securing bolts (3), cut and remove the lock wire (4).
-
Remove the carrier securing bolts and remove the carrier.
-
Remove the disc securing screw and remove the disc.
-
Pry off the hub grease cap.
-
Remove the hub nut split pin and cover.
-
Remove the hub nut and washer.
-
Remove the hub assembly.
-
Remove the outer bearing from the hub.
-
Using a suitable punch, remove the inner (5), and outer bearing tracks (2).