Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1096001.png)
Front Bumper Shock Absorber: Service and Repair
Rear Bumper Isolator
Rear Bumper Isolator (76.22.70)
Removal
1. Remove rear bumper assembly.
2. Remove four nuts securing strut to rear cross-member, remove strut from vehicle and discard gasket.
Installation
1. Position strut and new gasket on cross-member and fit and tighten securing nuts on studs.
2. Fit bumper assembly to struts.
