Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Front Door Latch: Service and Repair
Passenger Door Lock Mechanism
FRONT PASSENGER DOOR LOCK MECHANISM
Removal
1. Remove battery cover and disconnect ground cable from battery terminal.
2. Remove front door casing. See: Service and Repair
3. Position water shedder for access and feed door harness through water shedder.
4. Carefully remove water shedder from door and place adhesive side down on a clean dry plastic sheet.
5. Release door lock actuator harness multiplug from mounting bracket and disconnect multiplug.
6. Position plastic inner sheet for access.
7. Disconnect outer door handle operating rod from lock mechanism.