Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1139002.png)
Installation
1. Position motor on mounting bracket and fit and tighten securing bolts.
2. Position motor/bracket assembly in trunk lid and connect lock link rod and harness multiplug.
3. Finally position motor/bracket assembly in trunk lid and fit and tighten securing bolts.
4. Position trunk lid liner and fit and fully seat new fasteners.
5. Position finisher over trunk lock.
6. Fit and tighten finisher securing bolts and fit bolt covers.
7. Connect ground cable to battery terminal and fit battery cover.
