Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1164032.png)
15. Disconnect wheel speed sensor harness connectors.
Sever and discard tiestraps securing front wheel speed sensor harness to upper wishbone.
Disconnect harness connector from sensor.
Repeat procedure to disconnect opposite side wheel speed sensor harness.
16. CAUTION: Do not suspend caliper from brake hose as this will damage the hose.
Remove brake calipers from carriers.
Remove caliper spring clip.
Remove guide pin dust caps.
Slacken and withdraw guide pins.
Remove caliper from carrier and tie to suspension mounting bracket.
Repeat procedure to remove opposite side front brake caliper.
