Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1164037.png)
33. Remove crossbeam to engine Hydramount securing bolts.
Remove bolt securing crossmember to Hydramount.
Fully withdraw bolt into crossmember insert.
Repeat procedure to remove and withdraw bolt on opposite side
34. CAUTION: To prevent damage to ball joints, secure each hub assembly to suspension turret using strong wire.
Remove lower nut and bolt from front shock absorber.
Repeat procedure to remove bolt from opposite side shock absorber.
