Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1166008.png)
32. From engine compartment, remove crossbeam front LH securing bolts.
33. Remove crossbeam to engine Hydramount securing bolts.
Remove bolt securing crossmember to Hydramount.
Fully withdraw bolt into crossmember insert.
Repeat procedure to remove and withdraw bolt on opposite side
34. CAUTION: To prevent damage to ball joints, secure each hub assembly to suspension turret using strong wire.
Remove lower securing nut and bolt from front shock absorber.
