Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1166013.png)
50. Remove crossbeam front mountings.
Remove front mounting heatshield.
Remove four bolts securing mounting to crossbeam.
Repeat procedure to remove mounting on opposite side.
51. With assistance position crossbeam on hydraulic press.
Place a suitable support on press bed.
Position and align crossbeam/bush on support.
52. Position a suitable mandrel on top of bush and operate press to remove bush from crossbeam.
