Vanden Plas (X308) V8-4.0L (AJ27) (2000)
4. Invert subframe and position assembly on special tool 204-116, with subframe located in the recess.
5. CAUTION: Ensure special tool 204-116-06 is correctly aligned and does not contact the bush housing bore.
Remove bush from subframe.
Align the top of special tool 204-116-06 with the press-ram.
Operate press to remove bush.
6. Remove bush from special tool and discard bush.
7. Thoroughly clean the bush-housing bore.
Installation
1. Use a coarse grade emery cloth to roughen the bush-housing bore, and mating surface of the bush.
2. Using an air line, remove residual dust from bush and housing mating surfaces.
3. Clean the bush-housing bore and bush with cleaning solvent (SPB3 Solvent 30) or equivalent.
4. Invert suspension subframe.