Vanden Plas (X308) V8-4.0L (AJ27) (2000)
22. Remove lower nut and bolt from front shock absorber.
-
Repeat procedure to remove bolt from opposite side shock absorber.
23. Slacken but do not remove crossbeam rear bolt and nuts.
-
Slacken crossbeam LH rear mounting bolt and nut.
-
Repeat procedure to slacken crossbeam RH rear mounting nut.
24. Release lower steering column from pinion shaft.
1. Remove lower steering column nut and bolt.
-
Move column upwards to release it from pinion shaft.
25. Disconnect steering rack transducer harness front connector.
-
Release harness connector from body retaining clip.
-
Disconnect connector.