jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Front Axle Crossmember Front Bushing|Page 5075 > < Front Axle Crossmember Front Bushing|Page 5073
Page 7
background image

4. From engine compartment, install but do not tighten crossbeam front RH bolts.

5. From engine compartment, install crossbeam front LH bolts and tighten to 22-28 Nm.

6. Install power steering fluid reservoir.

-

Position reservoir on mounting bracket.

-

Install reservoir securing nuts and bolts.

7. From engine compartment, tighten crossbeam front RH bolts to 22-28 Nm.

8. Install lower steering column on pinion shaft.

-

Move column downwards to engage coupling splines on pinion shaft.

1. Install nut and bolt and tighten to 22-28 Nm.

9. Install shock absorber on lower wishbone.

Front Axle Crossmember Front Bushing|Page 5075 > < Front Axle Crossmember Front Bushing|Page 5073