Vanden Plas Axle Crossmember Front Bushing - Service and Repair
/v8-4.0l_(aj27)/Page-1173002.png)
2. Engage hooks in the engine front lifting eyes.
3. Tighten hook adjustment nuts until weight of engine is supported.
8. Remove generator front cooling duct.
-
Remove bolt.
-
Move duct rearwards to release tang from undertray.
-
Release front duct from rear vertical duct.
9. Remove scrivets or screws securing undertray to bumper cover. Discard scrivets.
10. Remove and discard tiestrap securing undertray to crossbeam front brace.
11. At each side of vehicle, remove and discard scrivet securing undertray to wheelarch liner.
12. Remove undertray from vehicle.
13. Remove both front road wheels.
