Vanden Plas (X308) V8-4.0L (AJ27) (2000)
28. Release lower steering column from pinion shaft.
1. Remove lower steering column securing nut and bolt.
-
Move column upwards to release it from pinion shaft.
29. Support weight of crossbeam.
-
Position a jack under crossbeam.
-
Place a piece of wood between jack and crossbeam.
-
Raise jack to just support crossbeam.
30. From engine compartment, remove crossbeam front RH securing bolts.
31. Remove power steering fluid reservoir for access.
-
Remove reservoir securing nuts and bolts.
-
Position reservoir for access.
32. From engine compartment, remove crossbeam front LH securing bolts.