Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-1174004.png)
11. Ensure bush is fully seated in subframe.
-
The clearance between the bush flange and subframe must not exceed 1.5 mm.
12. Ensure bush is aligned correctly in subframe as detailed in Step 8 or 9 as appropriate.
13. Wipe off all excess adhesive from subframe and bush, and remove masking tape.
14. NOTE: Allow adhesive at least 30 minutes to cure, before installing subframe on vehicle.
Install suspension subframe on vehicle.
