Vanden Plas (X308) V8-4.0L (AJ27) (2000)
5. Slacken and remove two screws securing armrest retaining clip and remove clip from armrest.
Installation
1. Position retaining clip on armrest and fit and tighten securing screws.
2. Position switchpack/ashtray and finisher on armrest and fit and tighten securing screws.
3. Position armrest on casing and fit and tighten four securing screws.
4. Fit casing to door. See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair
5. Connect ground cable to battery and fit battery cover.