Vanden Plas (X308) V8-4.0L (AJ27) (2000)
1. Disconnect battery ground cable; Refer to 'Battery, Battery Cable.' See: Starting and Charging/Battery/Battery Cable/Negative
2. Remove roof console; Refer to 'Body and Frame, Interior Trim, Console.' See: Service and Repair
3. Remove switch module.
Place console on soft, clean surface.
Remove six screws.
Carefully remove module from console.
Remove bulbs from module.
Installation
1. Installation is reverse of removal.
2. Reconnect battery ground cable; Refer to 'Battery, Service and Repair, Battery Reconnection Procedure.' See: Starting and
Charging/Battery/Service and Repair